View Single Post
  #5  
Old 21st July 2009, 07:17 AM
Trevor Crone's Avatar
Trevor Crone Trevor Crone is offline
Friend
 
Join Date: Sep 2008
Location: London
Posts: 2,609
Default

Michael, pleased to read things are going well with your processing of sheet film.

With regard to friction of film base, using the self adhesive plastic domes as I've mentioned, doesn't in any way mark the film.

Light leaks, this could be the result of a number of causes, i.e. poor seating of the film holders in the camera back. I've also had slight fogging of the film corners when I used a too bright a room light above my Orbital processor, came through the pouring slot. So one corner was always slightly fogged. I simply cured this by using another light some distance from the processor.
__________________
"To the attentive eye, each moment of the year has its own beauty, and in the same field, it beholds, every hour, a picture which was never seen before, and which will never be seen again" Ralph Waldo Emerson.

Timespresent
Arenaphotographers
Reply With Quote