View Single Post
  #7  
Old 24th December 2008, 03:06 PM
Paul Mitchell's Avatar
Paul Mitchell Paul Mitchell is offline
Friend
 
Join Date: Dec 2008
Location: South Bucks
Posts: 259
Default

Quote:
Originally Posted by Dave View Post
Did you use a rotary cutter for the grooving?

I found that to be the case with the pegs; until it wasn't I didn't like the patchy development the resulted from one negative partly covering another.
As I said, with gentle adgitation the mushrooms should be OK.
Dave, I used a Stanley knife and made deep cross hatch scoring across the whole bottom, I then finished off with a quick rub with some wet & dry to get rid of the sharp edges, works a treat. I also agree with you about using more than 80ml, I in actual fact use 150ml and it's fine.
__________________
When people ask what equipment I use - I tell them my eyes.

Arena Photographers
Reply With Quote