View Single Post
  #8  
Old 30th May 2014, 12:29 AM
Rob Hale Rob Hale is offline
Friend
 
Join Date: Dec 2010
Location: Bay of Plenty New Zealand
Posts: 95
Default

Hi Russ,

Just found your question.

My CPE 2s have two sections of momorail rising up beneath the drums in their rotating position. These are about 10 mm wide, 4.8 mm tall and 130 mm long, onto these one “pops” the roller carriages which have an oblong cutout to fit.

There is basically one roller carriage base, this base carries the rollers for the wide drums and you can also fit angled extension arms which bring the rollers inwards to a narrower gauge for the narrow drums. Mine are older white rollers.

I bought from CatLabs spare rollers of the new black type. I had to pop the rollers out one set of extension arms and fit them directly into to base for the wider drums.

The guy I dealt with at CatLabs is Omer, you could see if he still has roller sets available.

Regards
Rob
Reply With Quote