Quote:
Originally Posted by Terry S
People have often suggested on forums that they have made (sometimes crude but workable) negative carriers out of mounting board. Well worth a try if you can't find a proper one at the moment.
Terry S
|
I have found modelling plywood is quite good for this job. It comes in various thicknesses and in small sizes - modelling shops usually have stock.
It cuts easily with a craft knife and just needs finishing off with a very fine sandpaper. I usually finish mine off with a few coats of matt black paint.
The last one I made was a 6x9 neg set for my De Vere 504.
Neil.