Quote:
Originally Posted by John King
With the stop and fix you could try replenishment very much the same as I do for colour printing. For every 80sq inches of paper add 100cc of each which will keep them active for a long time. It may even work a time with the developer (Diluted form) but I prefer to ditch the old and start again.
|
I've never heard of such a high amount of replenishment liquids John.
I follow the Nova instructions for their slot processors, and add 10ml of working strength developer etc. per 10" x 8" (= 8o square inches) when doing B/W work. I generally do this at the end of session, or when about ten 10 x 8's have been printed.
To quote from the AG Photographic site (
https://www.ag-photographic.co.uk/no...sor-2076-p.asp), "
USAGE BASED REPLENISHMENT - Replenishment rate 10cc of working strength solution per 10x8 print i.e. 50cc per 5 prints, or equivalent print area."
Maybe the amounts are done differently with colour work? If not, I'm curious as to why you replenish the way that you do?
Terry S