It sounds like the rewind spindle is loose, or damaged so that it is slipping. If you open the empty camera, you could grip the bit that connects to the film canister and turn the crank to see if there is any play. One way of tightening these if it is loose is to put a screwdriver into the spindle to stop it turning, and then tighten by turning the crank. This works on cameras where the top bit with the crank screws onto the spindle. Be very careful, however, and check first to see if you can ascertain how it fits together. If you're unsure, don't attempt anything until you get more information/advice. A google search for OM10 rewind repairs might get you something. There's loads online about the OM1.
Alex
Sent from my iPhone using Tapatalk
|