Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> Kickstarter for Hasselblad Instax Back |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Kickstarter for Hasselblad Instax Back
I've just come across this campaign, for an new instant back for Hasselblad cameras, and I know there are a few owners out there!
The campaign has finished but it says that they will be available to buy in 2021. It takes over from the Polaroid back, using Fuji Instax film instead. https://www.kickstarter.com/projects...rn/description Shame that it's only for Hasselblad cameras though. Terry S |
#2
|
||||
|
||||
Or it could be the perfect excuse for adding a Hasselblad camera to accessorize your Instax back!
__________________
MartyNL “Reaching a creative state of mind thru positive action is considered preferable to waiting for inspiration.” - Minor White, 1950 |
#3
|
||||
|
||||
Good one, Marty! :-)
Well, no not for me. Makes it the tiny format, doesn't it? Frank |
#4
|
|||
|
|||
The image area of Instax film is 46mm x 62mm, so it would work out quite well. Better than the Polaroid pack film back I had for my Mamiya 645, where the small image was in one corner of the print.
|
#5
|
|||
|
|||
I use instax wide in my instax 200 camera or with my 5x4 camera
|
#6
|
|||
|
|||
A failed KickStart?
As a long-time Hasselblad user, the concept of an instant-print back is appealing. I didn't know of it before today. But when I looked at the website, I found hundreds of comments from angry backers, asking about delivery or demanding a refund. Evidently COVID is offered as an excuse.
I mated a Polaroid Swinger to a Hasselblad in the late sixties. My Swingelblad wasn't much cop because it got in the way of the wind-on crank and I couldn't find the original knob. There was no darkslide and the two elastic bands interfered with the lens-release button and the shutter release. I don't think I got further than the first two or three images. At work we used the 50asa packs that provided a printable negative, which was (almost?) the same speed as the 5x4" Ektachrome of the day, so it checked on exposure.. Last edited by JOReynolds; 25th January 2021 at 11:07 AM. |
#7
|
|||
|
|||
Quote:
COVID may be a legitimate reason, for it seems that the company behind this item, have also made some other items via Kickstarter, although again I haven't checked the comments, but I'm sure most buyers would have done before signing up for something new... surely???... I know I would and have, having now bought a number of things via several campaigns. They all over run and yes, there were calls for refunds. I held out on them all though and got what was promised. So, the bottom line is, accept that there will be bumps along the road on Kickstarter campaigns, as the majority are first time creators. Compare this to bigger named manufacturers, who build an item and then advertise and sell it. The majority of Kickstarter etc. have to do the opposite with their campaigns and have to get the funds first, before manufacture and occasionally thing go slightly wonky. Terry S |
#8
|
||||
|
||||
Quote:
Thanks for the information. Well.. or rather not. Very tempting and very expensive. Frank |
#9
|
||||
|
||||
I also saw the irate comments, but also saw that they had delivered on a photo-related project in the past so figured they were legit. However, even those with the best intentions on Kickstarter often over-reach themselves. Not sure if that has happened here, as they do have project experience which seems to be where people usually come unstuck - not realising the effort and multiple skillsets required. Their initial target seems very low (might just about pay for the mouldings) but again, some better organised companies often just use Kickstarter as a sort of marketing engine rather than need the money to get started. From what little I read, they may have made some design changes which will not have helped in hitting their target date...
Bottom line in my view is that they are legit but have hit some snags and combined with Covid-19, that has set them badly late. As Terry says - Kickstarter is a bumpy road - don't expect things to go smoothly and accept that you may end up with nothing for your money through people biting off more than they can chew, or deliberate fraud (though actual fraud is more likely on Indiegogo due to the way they allow projects to cash in without reaching the target amount). |
#10
|
|||
|
|||
Quote:
Terry S |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Hasselblad A12 back info/help | paddy | Cameras - medium format | 10 | 24th April 2020 12:15 PM |
Hasselblad A12 Back slipping | DaveInElland | Cameras - medium format | 35 | 17th October 2019 03:35 PM |
Impossible instant film pack in Hasselblad back? | JOReynolds | Cameras - medium format | 1 | 4th August 2014 11:55 AM |
Hasselblad A12 back | Alan Sleator | Cameras - medium format | 3 | 5th July 2013 10:35 AM |
Fixing a hasselblad back | cesare | Cameras - medium format | 3 | 8th October 2011 05:38 PM |