Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> Clothes Pegs. |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#11
|
|||
|
|||
Quote:
The other suggestions above describe dry top clips already threaded onto the line. This is good practice because, in my experience, liquid trapped in the top clips, which then dribbles down the film, is the main cause of drying marks. |
#12
|
|||
|
|||
A toothed clip at the top of a hanging film and a couple clothes pegs on the bottom is my solution if I am short of toothed clips, which I am not.
In fact I have more than I can really justify and room to use where I hang my films to dry. I must review and advertise the disposal of the excess here on FADU! Mike |
#13
|
|||
|
|||
https://www.ebay.co.uk/itm/8-Pcs-Woo...wAAOSwKS9eLVG-
Just found this. Had to smile at the price. Got to thinking, with all the lucky heather and clothes pegs gypsies used to sell, they must have been loaded. |
#14
|
|||
|
|||
IKEA sells clotheslines with brackets in one pack and sprung metal clips in another pack. Prices are really low but you have to get there first and I don't think they do mail order.
|
#15
|
|||
|
|||
I recently bought some stainless steel clothes pegs off of ebay, mostly for hanging washing in the garden, when the weather is better. I've tried both wooden and plastic ones over the years, but they both fall apart relatively quickly.
But these new stainless steel ones look and feel much better and look well made. The majority will be used to hang washing, but I've kept a few back to try out film hanging, to dry, as well, as I only have a pair of the Paterson ones. There are a few different designs, and mine cost a little more than the standard ones, as these have a small bit of plastic in the ends to stop stains from the pegs getting onto the clothes - apparently?! If you don't mind waiting you can get them a little cheaper direct from China or Hong Kong, but I needed some straight away. The cheaper ones are: https://www.ebay.co.uk/itm/20Pcs-Sta...YAAOSw3UZa3sWw And the packet that I bought are: https://www.ebay.co.uk/itm/Set-of-80...72.m2749.l2649 Terry S |
#16
|
||||
|
||||
I use trouser hangers, like these
https://www.ebay.co.uk/itm/20X-Metal...oAAOSwLfxd35-5 Fully adjustable for 35mm, 120 (and I guess pretty much anything bigger) rubber tips help hold the film, can be used top and bottom, and with enough weight to hold it "down" Works for me Ian
__________________
Learn to live, live to learn |
#17
|
|||
|
|||
The CambsIan method of using trouser hangers to hold drying film in is just like my temporary Nova print clip dodge.
I misplaced my Nova print holder clip and looked around for a replacement. The answer came in the shaped of a Marks and Spencers plastic trouser hanger. The two clips were snapped off and the clips worked like a dream. They are lined with a closed cell soft rubber material. Fair enough they left a bit of a mark but it got the job done. Cheers.
__________________
It will all be over by Christmas. |
#18
|
|||
|
|||
My Hobby-Horse
I am at risk of boring people with my consistent story, having written at length about drying and drying marks on film. My most detailed was post #74 of 30 September 2015. Search for 'froth'.
There is no need for expensive equipment - successful drying without marks is just a matter of procedure. |
#19
|
||||
|
||||
I agree with Joe.
I use all the suggestion for clipping up negatives to dry. The main thing I notice is the the film clips keep going where others give up. If your negatives drop to the floor another method of cleaning off is to use a show less difficult than trying to load them back on a real.
__________________
Mitch http://photomi7ch.blogspot.com/ If you eliminate the impossible whatever remains no matter how improbable must be the truth. |
#20
|
|||
|
|||
I am going to give JOReynolds method a try.
I have two films to develop this week. Do you dry an inch or so of the film with a hair dryer for the top film clip? Or leave the complete film wet? Cheers.
__________________
It will all be over by Christmas. |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Best pegs for hanging FB prints to dry? | Adrian Holmes | Monochrome printing techniques | 2 | 22nd February 2011 06:49 PM |