Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> Zone VI Enlarger |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Zone VI Enlarger
I've recently run into a Zone VI enlarger and all the kit that goes with it and am being asked by the seller to make an offer based on my research. It seems that this is a good enlarger setup from the limited information I can find. I believe it is a series I. Prices on the web range from $399 from six years ago to $1000 today on ebay.
This includes an easel, timers, trays, pretty much anything that makes a darkroom. So, my questions are: What should I offer this gentleman? Should I even consider buying this? Does anyone have experience with this brand? Any other information or thoughts pertaining top this or the world in general are very much appreciated. Konah |
#2
|
|||
|
|||
I don’t have any direct experience of this particular make of enlarger, but believe them to be well made. My only reservation would be on the question of spare parts should anything be needed. For example what type of lamp is it fitted with, and are replacements readily available?
As to its value and that of the other components, the only way to establish this is to see what similar items are selling for. |
#3
|
||||
|
||||
Quote:
Because of the single focusing track rod I find the focusing movement a little sloppy I have made my own modifications to improve this problem, I believe the later version with twin focusing rails to be much improved, this enlarger is great for split grade printing and can be used in a variety of ways, I find the print times rather long on 35mm but much better with larger formats (can handle up to 5x7 inch negs). My main worry is that if one of the tubes blow where would I get it replaced. I have an excellent article by Les Mclean on this enlarger which I downloaded from the internet however I have tried google but can't find the address, best bet 'ask Les'. Hope this helps |
#4
|
||||
|
||||
I was just going to say I am sure Les uses this enlarger or has used one at some stage. If you have any specifics to ask do try our 'Ask Les.'
Neil.
__________________
"The aim of art is to represent not the outward appearance of things, but their inward significance." Aristotle Neil Souch |
#5
|
||||
|
||||
I believe the tubes were made by Aristo, and there's a question mark over whether they are still able to supply them. Check with Calumet who service the Zone VI brand and can probably advise.
|
#6
|
||||
|
||||
I've used the MK II Zone VI VC enlarger for the past 15 years and can recommend it. With regard to the availability of the tubes I spoke to Richard Newman of Calumet America about 2 years ago and at that time Calumet could still supply replacements. I've no idea of a S/H value, suggest you start to haggle at about £300. As a matter of interest I saw an LED head in Richard Newman's darkroom a few years ago and was very impressed with the prints he made and his comments on it's performance. I have seriously considered replacing my Zone VI head for the LED.
|
#7
|
|||
|
|||
Thanks all for the help, it is very appreciated. I'll have a chance to talk with the man selling the equipment in the next few days and see what will happen.
After years of sharing darkrooms I'm quite excited about having my own so I don't want to jump in head first without knowing the consequences. |
#8
|
||||
|
||||
Hi again
I found my copy of Les Mcleans article on the Zone VI enlarger, it is a second generation copy which I have scanned so the quality of the photos will not be wonderful however the text should be readable, follow the link below. http://www.tonylakin.com/tonylakin/images/zvi%20enl.htm |
#9
|
|||
|
|||
Thanks vanannan, will print and read. I picked up a copy of "The Fine Print" by Fred Picker to go along with it too.
|
#10
|
|||
|
|||
I finally procured the enlarger and everything to go with it. Now I have to build the darkroom. Must say I'm excited!
|
Tags |
cost, darkroom, enlarger, question, zone iv |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
unkown enlarger ? | BobRob | Darkroom | 10 | 18th January 2011 11:39 PM |
Enlarger Lenses | Roy_H | Darkroom | 8 | 21st May 2009 11:52 AM |
My new enlarger... | Mike Meal | Darkroom | 12 | 10th April 2009 06:19 AM |
Enlarger Alignment | Bill | Darkroom | 27 | 19th February 2009 05:46 PM |
zone system : another I'm curious question | Argentum | Monochrome Film | 25 | 14th December 2008 11:38 PM |