Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> sticky back felt for devere 504 lightbox |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
sticky back felt for devere 504 lightbox
Hi
the felt that sits around the opening that gets compressed onto the neg carrier is very much worse for ware on my De vere 504 can anybody direct me to a good replacement I thought about using the felt part of velcro but I'm a bit worried that it will get hot and make a mess It needs to be about 10mm wide and 2 mm thick thanks robin |
#2
|
|||
|
|||
You might try try 10mm velvet ribbon (from a habadashers) and double sided tape - a low -cost fix.
If you are in the area and can drop in or for a fully engineered felt solution - you could try Dobsons: http://www.dobsongasket.com/ I have called in and bought off-cuts for smal change. Good luck. |
#3
|
|||
|
|||
Hi Robin
I second what Kiteboy says about 10mm velvet ribbon, I purchased mine from a local haberdasher. I have used the same for my Beseler enlarger and in the past for a Durst Laborator that I had it works a treat. regards Richard |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
devere 504 | Andy | Darkroom | 9 | 8th January 2013 11:53 PM |
Free - Lightbox in aluminium flightcase! | DaveP | Sale or Wanted | 4 | 3rd July 2012 10:27 AM |
Devere 504 BIN £250. | vanannan | Auctions of Interest | 7 | 29th April 2012 06:34 PM |
Nikon F3 sticky meter illumination button | Phil | Cameras - small format | 2 | 9th April 2012 07:20 PM |
Is this perhaps a topic for "Sticky" status? | MartyNL | Feedback and forum matters | 7 | 5th February 2012 05:17 PM |