Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> Lens position of shutter release. |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Lens position of shutter release.
This maybe a daft question, when looking at your lens mounted on your large format camera what is the best place to have the shutter release? I have seen pics of cameras with the shutter release cable dangling down with the shutter release at 9:00 o'clock others where the cable is threaded horizontally from the 12:00 o'clock position. Does it all depend where the aperture/shutter speeds are marked on the lens or is it to do with which side you stand. Does it matter of you are left or right handed?
__________________
"Tea is surely the king of all drinks. It helps against the cold, it helps against the heat,against discomfort and sickness, against weariness and weakness". Heinrich Harrer. |
#2
|
|||
|
|||
I used to have my lenses mounted so that the shutter release was at 6 o'clock, but found out that, when using tilt on the front standard, the cable release would foul on the uprights.
I've reset them all now so that the release is at 9 o'clock, the cocking lever at 12 o'clock and the shutter opener at 3 o'clock. Mike |
#3
|
||||
|
||||
Quote:
__________________
"Tea is surely the king of all drinks. It helps against the cold, it helps against the heat,against discomfort and sickness, against weariness and weakness". Heinrich Harrer. |
#4
|
|||
|
|||
Some lenses have a locating pin to secure the lens so that it doesn't rotate in the lens board, the lens board has a slot at 6 0'clock, and the pin is also at 6 o'clock.
Compur and Prontor/Ibsor shutters have the release arm at approx &@30/8 o'clock this is because some cameras have a shutter release on the body that links to it With oler dial set shutters the speed setting dial should be at 12:00. With the first rimset Compurs the indicator line for the shutter speed should be at 12 o'clock and the aperture scale sits neatly at the bottom. With later Compurs and Copals there's vaiations, some Copals have the speed markings on the rotation speed control ring, and a line at 12 o'clock indicates the set speed, others have a line on the ring and the speeds are marked on the face plate. However all are designed to have the shutter release lever in that 7:30/8 o'clock position if shutter release linkage is required. This goes back to the late 1890's when folding pocket cameras became available particularly with shutters like the 1902 Compound, and the Compur in 1912.. The early dial set Compur is derived from the Compound using a geared slow speed governor instead of a pneumatic piston. Of course you can position a lens any way you want, I keep mine mounted in the standard way simply because it's easier to work quickly and intuitively with the controls in te same place. Plus a few of my lenses have the locating pins and matching lens boards. Ian |
#5
|
||||
|
||||
Ian thank you for your most informative response.
__________________
"Tea is surely the king of all drinks. It helps against the cold, it helps against the heat,against discomfort and sickness, against weariness and weakness". Heinrich Harrer. |
#6
|
||||
|
||||
I just let it lay wherever it lands and concentrate on getting the aperture and shutter speeds in a convenient location (especially with a wideangle in a recessed lensboard).
I quite enjoy the exciting little hunt for the shutter release socket every time I change lenses |
#7
|
|||
|
|||
My lens panels are square - non specific as to rotation. I still can't get them in the same way round each time.....
|
#8
|
||||
|
||||
At 9 0'clock generally as on the Technar I was using today at Rydal and Grasmere. Normally I have the 75mm in helical mount fitted but here it's rigged up with a Schneider super angulon 58xl on a Linhof wide angle focusing device shooting 6x12 in preparation for Ireland in the summer.
__________________
MartyNL “Reaching a creative state of mind thru positive action is considered preferable to waiting for inspiration.” - Minor White, 1950 |
#9
|
|||
|
|||
Quote:
Sinar mounted my lenses with the cable socket about 9 o'clock (facing the camera), and all shutter and aperture settings are in the same locations - very convenient. |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Bronica shutter release | Phlogger | Cameras - medium format | 2 | 28th March 2019 03:22 PM |
Enlarging lenses in stepless control position | MartyNL | Darkroom | 3 | 11th November 2012 12:45 PM |
Cable release for Sinar shutter. | JimW | Sale or Wanted | 6 | 3rd January 2010 07:18 PM |
Tom Abrahamsson Soft release anybody? | Andrew Bartram | Photography in general | 3 | 26th October 2009 07:43 PM |
Checking film position? | mpirie | Cameras - Large Format | 19 | 25th August 2009 12:04 PM |