Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> eliminating darkroom dust |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
eliminating darkroom dust
I have been wiping my darkroom gear, (dry side enlarger easels timers ) I have been using a product called elimistat ,its a general purpose anti static spray .I spray it on a cloth and give my enlarger a good wiping inside and out every time I have a session in my darkroom .I have found that its nearly completely eliminates dust on my negative and on my paper, and I am very pleased with the product ,It doesn't smell and is not greasy and leaves no residue when dry .
|
#2
|
|||
|
|||
Dust
I must be unique because dust has never been a problem for me even though my last two or three darkrooms all had carpeting on the floor. It is vacuumed about every 10 to 14 days and even then after stirring things up, there has never been a problem.
Having said that when I lived in West Sussex over 22 years ago, I always had to spot prints. If they were B&W or colour that made no difference, but up in the North East I don't have a problem. Now the inside of my car, particularly around and on the dashboard .....that is a different matter. |
#3
|
||||
|
||||
I hope it does leave a residue when dry - that's how anti-static spays work . It leaves a conductive layer behind when the solvent evaporates, which allows the charge to move to ground across the surface of the material. No need to spray metal - you can simply earth that, but non-conductors like plastics and glass cannot transfer a charge (by definition: they are non-conducting) so coating it with a conductive film via the spray allows the charge to move. If part of the equipment is part metal and part plastic, spraying it so the spray overlaps the metal and plastic will allow the charge to move off the plastic and down to ground via the metal. Annoyingly, this only works for the surface that is coated - the other side of the plastic will still hold a charge if you do not treat (and earth) that too.
Static electricity is a fascinating thing - bl**dy annoying, but fascinating... |
#4
|
||||
|
||||
I was given a tip by an old pro darkroom guy a long time ago and that was to store all measuring beakers etc upside down. So often they are left the right way up and dust can settle inside. Then we pour in our favourite dev and wondfer why there's spots on the prints!
I have been doing this for over 40 years now, in three different darkrooms, and have never suffered from dust spots. Neil.
__________________
"The aim of art is to represent not the outward appearance of things, but their inward significance." Aristotle Neil Souch |
#5
|
|||
|
|||
Quote:
Terry S |
#6
|
||||
|
||||
Terry,
Any tip that is free to try I always give a go! Neil.
__________________
"The aim of art is to represent not the outward appearance of things, but their inward significance." Aristotle Neil Souch |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dust on Negatives | valerio | Monochrome Film | 38 | 7th April 2013 08:59 PM |
Pro-Co Dust Stat. | Gavin | Equipment miscellaneous | 7 | 15th June 2012 11:00 PM |
Dust (Revisit # 1,234,567...) | Victor Krag | Cameras - Large Format | 4 | 7th April 2009 07:22 AM |
dust and glass | Argentum | Monochrome printing techniques | 6 | 15th February 2009 10:42 PM |
Eliminating the shakes | Argentum | Photography in general | 7 | 4th November 2008 09:45 PM |