FADU F-STOP ENLARGER TIMER

The project files for the FADU F-stop Enlarger Timer have now been moved to GitHub as that is a more appropriate place to maintain the project - but read on for an overview and release...

Hi Bob,
Yes it’s on the same network.
If I ping to the iP-address it responses with ony msecs figures.
I will dive into it later this week and let you know if I find anything odd.
But, thanks a lot for your help :-)

No problem at all. If you are getting good times on your network, it might be worth trying the timer in [BASIC R3] mode - my network throws up random bad delays so I can't use it. It does not have the 500ms restriction.

Also, you could try using RESTer with Chrome as per the manual - see if that works for you instead of Postman - the first example is the /info command. If that works OK then you can think about re-programming the Sonoff Basic R3 with the new firmware using OTA as that gets rid of all the issues with network delays and Sonoff's poor API implementation...

Oh, BTW, another thing Sonoff neglected to mention in their API documentation is that to use the Inching API you need to first setup the pulse length using the zeroconf/pulse command and then use the /zeroconf/switch command to actually turn the Sonoff on.


Have fun!