Support our Sponsors, they keep FADU free:   AG Photographic   The Imaging Warehouse   Process Supplies   RH Designs   Second-hand Darkroom Supplies  

Notices

Go Back   Film and Darkroom User > Equipment > Equipment miscellaneous

  ***   Click here for the FADU 2015/2014 Yearbooks   ***

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 6th May 2015, 02:38 PM
DaveP DaveP is offline
Friend
 
Join Date: Dec 2009
Location: Sheffield
Posts: 990
Default Wisdom of rolling your own by hand

Afternoon all.

I'm finding 36-exp rolls of 35mm a bit long for my tastes when I'm using 400 speed film. I find myself sticking a roll in the Xpan due to low light, shooting half a dozen shots (there's 20 on a roll with the Xpan), then it goes dark and the next day I'm wanting to go back to 100 speed but instead have a camera full of 400 to shoot through or waste.

So, I was looking into buying some 400-speed as a 100ft bulk roll and rolling my own half-length cassettes. I was wondering what anyone's experience of rolling their own by hand is, instead of using a bulk loader?

I don't own a loader and would have to buy one, and some of them look quite expensive these days new. I do have a huge changing tent so space isn't a problem, and dust should be OK. I was thinking of sticking a couple of nails in an old wooden ruler about 85cm apart, hooking the sprockets on the nails to measure, cut, then manhandle into cassettes.

Is this a bonkers idea? Would life just be a lot easier with a loader? I wouldn't be doing dozens of rolls day in day out, maybe just do a half dozen which would last anything from a week or so to a few months. I'd be keen to hear other people's widom/horrorstories on this subject.

Cheers
Reply With Quote
  #2  
Old 6th May 2015, 02:52 PM
Tony Marlow Tony Marlow is online now
Friend
 
Join Date: Sep 2008
Posts: 1,282
Default

If you wanted a loader I have one tucked away somewhere. If you would like it let me know.

Tony
Reply With Quote
  #3  
Old 6th May 2015, 02:55 PM
alexmuir alexmuir is offline
Friend
 
Join Date: Jan 2010
Location: Glasgow, Scotland.
Posts: 2,668
Default

I use an AP loader, and would recommend getting something similar. The part-used roll remains safely stored in a dust free environment. Doing without would mean taking the bulk roll back and forth from a container, and increasing the chances of dust, etc on your film. I was lucky to buy my loader new before they became so expensive. They do, however, crop up regularly on eBay, and are not always expensive. The bulk rolls are now the best part of £70, so I would think it best to be on the safe side, and use a loader.
Alex
Reply With Quote
  #4  
Old 6th May 2015, 03:25 PM
Richard Gould Richard Gould is offline
Friend
 
Join Date: Dec 2008
Location: Jersey Channel Islands
Posts: 5,433
Default

Firstcall do an own brand bulk loader for around £25, maybe worth a look, compared to the AP loader they do at £54 it looks pretty good value,
Richard
Reply With Quote
  #5  
Old 6th May 2015, 03:41 PM
DaveP DaveP is offline
Friend
 
Join Date: Dec 2009
Location: Sheffield
Posts: 990
Default

Hmm, maybe a loader would be wise then. One thing in favour of the freehand method to me is not having to drag the film twice through a cassette felt trap.

Are loaders (other than the well-regarded AP model), much of a muchness then, or anything in particular to watch out for?

Tony thanks for the offer, I may well be in touch....
Reply With Quote
  #6  
Old 6th May 2015, 04:27 PM
Alan Clark Alan Clark is offline
Friend
 
Join Date: Aug 2009
Location: North Yorkshire
Posts: 1,426
Default

Dave, I used to use bulk film and a loader many years ago. When I found that the loader, or the process itself, was scratching the film I abandoned the loader and simply rolled my own, as you have described. It worked very well. I have been thinking of going back to doing this as, like you, I am finding 36 exposure lengths of film too long for my current purposes.
Give it a go!

Alan
Reply With Quote
  #7  
Old 6th May 2015, 04:29 PM
Mike O'Pray Mike O'Pray is offline
Friend
 
Join Date: Oct 2008
Location: Daventry, Northants
Posts: 8,969
Default

Quote:
Originally Posted by DaveP View Post

Is this a bonkers idea? Would life just be a lot easier with a loader?
Cheers
No to the first Q and yes to the second. Some people seem to manage hand-rolling but I often wonder if the apprenticeship was harder and longer than they want to admit to.

The great thing about a loader is that you can load in a couple of minutes on a whim so to speak so no need to prepare in advance

If you have been offered a loader then I'd take it.

Mike
Reply With Quote
  #8  
Old 6th May 2015, 04:40 PM
David Lingham's Avatar
David Lingham David Lingham is offline
Friend
 
Join Date: Dec 2008
Location: cardiff
Posts: 460
Default

It is a good idea, you can experiment with different film speeds and developer times etc. Only down side I found is it will increase your processing costs. As you are still using the same volume of developer for 12 frames as you would for 36.
__________________
David Lingham

www.davidlingham.uk
Reply With Quote
  #9  
Old 6th May 2015, 06:04 PM
DaveP DaveP is offline
Friend
 
Join Date: Dec 2009
Location: Sheffield
Posts: 990
Default

Quote:
Originally Posted by David Lingham View Post
Only down side I found is it will increase your processing costs. As you are still using the same volume of developer for 12 frames as you would for 36.

I have got Jobo 2500 series drums and the black reels which have a red divider, so I can load a 120 or half length 135 inside the divider, and another outside it. Two of those reels fit in my drum needing 250ml of juice for rotary, so it should work out fine.
Reply With Quote
  #10  
Old 6th May 2015, 07:15 PM
GoodOldNorm's Avatar
GoodOldNorm GoodOldNorm is offline
Friend
 
Join Date: Oct 2009
Location: Lincolnshire UK
Posts: 1,227
Default

I use a bulk film loader and load my film in used film cassettes. You can get the cassettes free from boots or any high street developing store if you ask politely. There is just enough film stuck out to tape your new film to, I use the thin brown parcel tape on both sides, this slips through the felt light trap easily.
Watson manual http://www.cameramanuals.org/booklet...ilm_loader.pdf

You tend to waste film using short lengths due to the film leader. I always load 36-38 exposures and take lots of photographs; unless I am trying a new film/developer combination then its 12 exposures.

Last edited by GoodOldNorm; 6th May 2015 at 07:43 PM. Reason: added text
Reply With Quote
Reply

Tags
35mm, bulk, loading, roll
Support our Sponsors, they keep FADU free:   AG Photographic   The Imaging Warehouse   Process Supplies   RH Designs   Second-hand Darkroom Supplies  

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Second Hand Densitometer valerio Darkroom 12 21st November 2013 05:37 PM
hand colouring (RC) Ian Marsh Print Finishing 3 8th July 2012 01:08 PM
Second Hand Film Holders Martin Aislabie Cameras - Large Format 10 10th June 2012 08:10 AM
Old Hand DavidH Introductions 11 15th May 2010 01:40 PM
Hand Colouring B&W Prints. Ag-Bromide Print Finishing 7 31st March 2010 06:18 PM


All times are GMT. The time now is 08:05 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.