Support our Sponsors, they keep FADU free:   AG Photographic   Keyphoto   The Imaging Warehouse   Process Supplies   RH Designs   RK Photo   Second-hand Darkroom Supplies   Silverprint Ltd

Notices

Go Back   Film and Darkroom User > Articles > Articles

  ***   Click here for the FADU 2015/2014 Yearbooks   ***

 
 
Article Tools Search this Article Display Modes
Prev Previous Post   Next Post Next
FADU F-stop Enlarger Timer App for Android
FADU F-stop Enlarger Timer App for Android
Published by Bob
20th August 2018
Default FADU F-stop Enlarger Timer App for Android

FADU F-STOP ENLARGER TIMER



The project files for the FADU F-stop Enlarger Timer have now been moved to GitHub as that is a more appropriate place to maintain the project - but read on for an overview and release notes etc...


INFO

Current Version: 1.4.0 released to the Google Play Store.

Project files: https://github.com/filmanddarkroom/FADU_Timer

Manual: https://github.com/filmanddarkroom/F.../documentation

Play Store entry: https://play.google.com/store/apps/d...omTimerWeb_0_1

Direct link to the current live version manual: https://github.com/filmanddarkroom/F...l%20V1_4_0.pdf


OVERVIEW

The FADU F-Stop Enlarger Timer is an enlarger timer which can optionally drive a reprogrammed WiFi smart switch or relay module to power the enlarger's lamp on and off. It has f-stop timing adjustments for either single-exposures or exposure test-strips, including a manual-switch-friendly mode for those unable to connect the app to a WiFi enabled switch.

The app is designed to work on phones, but will run well on tablets. I suggest you always restart your phone before a session and put the phone into Aeroplane mode to prevent sluggish response by the WiFi switch as the phone needs to concentrate on talking to the WiFi and not do any of the 100 other things it can do. If it does get sluggish, toggling out and back in to Aeroplane mode seems to fix it.

Free and open source, the source code is available on GitHub (https://github.com/filmanddarkroom/FADU_Timer). User instructions and details of the optional hardware interface are also in the manual on GitHub.

The timer can be used as a stand-alone timer to calculate f-stop timing for manual on/off switching of the enlarger, but can also be used to drive the enlarger lamp via a commonly available WiFi smart socket (Sonoff S20 or Sonoff Basic) that you reprogram to work with the timer. Alternately, an LC Technologies WiFi relay board module may be driven without the need to reprogramming (but as a bare pcb, it wlll need a box and a 5V power supply).

Reprogramming the Sonoff devices requires some basic electronics knowledge, but if you have experimented with the Arduino system it should not present any difficulties. The reason for this annoying extra technical step is that I have been unable to find an off the
shelf smart socket that can be driven directly from an Android device or web page. All the smart sockets I have found have to go through a Cloud-based service and the undefined time delays caused by this round-trip makes them unusable in this application where we need to define the on/off time with precision.

If you know of a smart socket that can be driven by a web browser on your local network ***without going through the internet first*** please let me know as it would be great to avoid this reprogramming step!

The LC Tech board does not require any programming but should only be used on the low-voltage side of an enlarger's transformer/stabilizer due to poor separation on the pcb between the terminal tracks and the low-voltage circuitry.




RELEASE NOTES


Version 1.4.0:

1. Single strip mode [SINGLE] added for when you are using individual strips of paper instead of making multiple strips across a sheet of paper. Each strip-time is for the whole f-stop calculated exposure.

2. The Memories now display their contents.

3. Now scales (mostly) correctly for tablets.

4. Main tab's F-stop Mode now reduced as all it's functionality now moved to the Strips tab.


Space was made for displaying the memory's contents by shoving the now largely obsolete f-stop calculation section on the Main tab to the right of the display.

I have updated the manual to include the changes since 1.3.0 and the instructions now include the Sonoff Basic Wi-Fi switch. I may make a reprogrammed version of this available on Tindie - TBA.

Some small tweaks:

Changed the Strips tab left side config title to "SET MODE" (still don't like it, but will have to do for now).

Changing strip Mode to [SINGLE] now updates the strip-time list - other selections already did this but adding the SINGLE mode means this button should do so too now.


Version 1.3.0:

1. STRIPS mode tab added: This mode allows the easy creation of f-stop incremented test strips. Three methods are included - see Strips Mode chapter below for details.
a. Continuous mode [CONT]: intended for users with no lamp switching hardware. Sounds a beep 0.5 seconds before the end of each strip’s time before starting the next strip time.
b. Auto mode [AUTO] : pauses the timer and switches off the lamp between each strip for a settable delay time.
c. Manual mode [MANUAL] : pauses the timer and switches off the lamp between each strip until the user taps [START] to move to the next strip.
2. Auto-Reset option added on the Settings tab. If set ON, resets the timer at the end of the exposure time to the previous time.

3. Delay time is now variable on the Settings tab from 0 to 10 seconds. An enhanced form of the previous “Count-in” setting.

4. About screen added to provide some basic info and links.


Version 1.2.0:

1. Stay Awake: Screen no longer goes to sleep (assuming your phone allows sleeping to be overridden).

2. Manual Link: added a button in the Settings menu to open this user manual on the FADU forum site using the phone’s default web browser. [obsolete in 1.3.0 – now a link to GitHub on the About screen]

3. Wi-Fi Relay Driver: Can now optionally drive an LC Technologies Wi-Fi relay module for low-voltage use. No reprograming required for this module but it should only be used on the low voltage side of a colour enlarger’s transformer/voltage stabiliser. It will also need a box and a 5V dc power supply.

4. Count-in Option: an optional 3-second delay to the count start added to allow time to prepare before the count starts. [upgraded to 0-10s selection in 1.3.0]


Version 1.1.0:

1. 1/10th Second Timing: Added ability to time in 0.1 second increments.

2. Up/Down buttons removed. Setting the exposure time is now performed by tapping the top (increment) or bottom (decrement) half of the required display number.
Article Tools

Attached Files
File Type: pdf FADU Enlarger Timer Manual V1_4_0.pdf (1.39 MB, 803 views)
 
Support our Sponsors, they keep FADU free:   AG Photographic   Keyphoto   The Imaging Warehouse   Process Supplies   RH Designs   RK Photo   Second-hand Darkroom Supplies   Silverprint Ltd

Article Tools Search this Article
Search this Article:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Article Article Starter Category Comments Last Post
Wanted: Enlarger Timer ianbarber Sale or Wanted 5 22nd August 2018 03:20 PM
Hauck MSA 100 or Mk II enlarger timer fotofundi Darkroom 0 26th February 2017 01:02 PM
Enlarger timer RussKelly Darkroom 0 14th September 2014 11:10 AM
FS: Baeuerle enlarger timer paulc Sale or Wanted 2 7th May 2012 06:56 PM
Enlarger timer issues PaulG Darkroom 20 27th November 2009 11:29 AM


All times are GMT. The time now is 11:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.

Article powered by GARS 2.1.9 ©2005-2006