Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> Ensign Aotorange 16-20 Repair |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Ensign Aotorange 16-20 Repair
I have an old Ensign Autorange 16-20, Rangefinder Camera. There was a fair bit of dust in the lens and the slow shutter speeds are definitely slow. The main body of the lens dismantles happily but I have got to the stage when I think I need to remove the rangefinder arm and second lens from the front. There are no obvious screwheads on either the front or reverse. Does anybody have any experience with dismantling one of these cameras with the Epsilon shutter. I need to clean and lubricate the shutter mechanism. I have tried removing the second front lens using some bicycle inner tube glued onto the end of a fat dowel, but refuses to budge. If I cannot gain access to the mechanism I think it will be a job for a professional with a hefty bill at the end. Cheers .
__________________
It will all be over by Christmas. |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ensign Special Ranger | alexmuir | Cameras - medium format | 29 | 24th August 2014 04:41 PM |
Ensign Selfix 420 | Tony Marlow | Cameras - medium format | 14 | 18th February 2014 11:40 AM |
Ensign 320 help required | JamesK | Cameras - medium format | 18 | 20th August 2013 11:15 PM |
Ross Ensign 820 Folder | dave shutter | Cameras - medium format | 16 | 13th March 2013 08:07 PM |
Ensign Cameras | Lostlabours | Photography in general | 17 | 28th February 2013 11:18 PM |