Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> De Vere 504 neg insert |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
De Vere 504 neg insert
Hi all,
Any one have a 6x9 Neg insert for a De Vere 504 they would part with? Cheers Diz |
#2
|
||||
|
||||
Quote:
Hi Paul, I had a job finding one too so eventually made one from craft ply which worked well for a few years. Then I acquired a spare De Vere 6x7 insert and cut / filed that out to the 6x9 size. Both versions work very well, but obviously the modified De Vere insert 6x7 is to be preferred. Neil.
__________________
"The aim of art is to represent not the outward appearance of things, but their inward significance." Aristotle Neil Souch |
#3
|
|||
|
|||
There are a variety of De Vere negative holders on ebay just now, including an adjustable one.
Some say theirs will fit all De Vere's, but I don't know. They are also priced at just about reasonable, up to ridiculous prices, so take a look and maybe make a purchase. Terry S |
#4
|
||||
|
||||
Thanks Chaps.
I will have a look at at a fabrication job Cheers Diz |
#5
|
||||
|
||||
Paul, I spent a long time trying to find a 6x9 mask without success. In the end I bought one from Odyssey Sales but it cost £60 inc postage.
__________________
Cheers, Barry |
#6
|
||||
|
||||
Thanks Barry. 60 squids isnt far off what folk are asking on fleabay for used inserts! Worth considering if the DIY job doesnt work out.
Cheers Diz |
#7
|
||||
|
||||
Quote:
If you make one out of modeling ply finish it of with a very fine paper then apply a few coats of dilute PVA to seal the ply. Then finish the job with a couple of coats of matt black. Neil.
__________________
"The aim of art is to represent not the outward appearance of things, but their inward significance." Aristotle Neil Souch |
#8
|
|||
|
|||
I was luck about 3 years ago and got a good selection of masks at a Camera Fair for less than £10, unfortunately I off-loaded the spares.
In my garage I have a couple of sheets of aluminium bought specifically to make some inserts for my 5108 negative carrier, which I must get around to, I need 7"x5", 6x17cm and 9x12cm masks. As I mentioned to Paul on teh UK LF forum I've made card masks in the past and that's what I've been using for some years for my 6x17 negatives. Mounting board impregnated with wood hardener (similar to Super glue helps rigidity. Ian |
#9
|
||||
|
||||
That's what I thought Paul. If you decide to get one from Odyssey call them on the telephone, they are very bad at responding to emails.
__________________
Cheers, Barry |
#10
|
||||
|
||||
Paul,
You could have had my spare ply DIY 6x9 inserts if I hadn't recently modified then to take 6x12 ! Neil.
__________________
"The aim of art is to represent not the outward appearance of things, but their inward significance." Aristotle Neil Souch |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What film stuff did you get for (insert holiday) this year? (2014) | StoneNYC | Photography in general | 27 | 5th January 2015 09:03 PM |
F/S: Canham MQC 5x7 Metal Camera, MQC Bag Bellow & Genuine Canham/Linhof insert in UK | EdBray | Sale or Wanted | 14 | 5th June 2013 02:32 PM |
De Vere 504 | Dave miller | Auctions of Interest | 3 | 5th June 2012 04:32 PM |
Conversion of a 220 Insert to 120 film | Mike O'Pray | Cameras - medium format | 6 | 23rd May 2011 11:29 PM |
35mm negative carrier insert for Durst/DeVere | Mike Meal | Sale or Wanted | 2 | 8th May 2009 03:32 PM |