Support our Sponsors, they keep FADU free:   AG Photographic   The Imaging Warehouse   Process Supplies   RH Designs   Second-hand Darkroom Supplies  

Notices

Go Back   Film and Darkroom User > Chemistry > Chemical formulae

  ***   Click here for the FADU 2015/2014 Yearbooks   ***

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 24th October 2015, 06:46 PM
Lostlabours Lostlabours is offline
Friend
 
Join Date: Apr 2012
Location: West Midlands/Aegean
Posts: 1,988
Default Microphen

The formula of Microphen has never been published but is similar to ID-68, the only difference is packaged Microphen contains a small amount Metabisulphite in Part A to stabilise and help prevent oxidation of the developing agents and the buffering is adjusted slightly to compensate for the effect of the Metabisulphite on the pH of the working developer. In practice ID-68 and Microphen and their replenishers are inter-changeable.

ID-68 Ilford "PQ Fine Grain" Developer

Sodium Sulphite (anh) 85 g
Hydroquinone 5 g
Borax 7 g
Boric Acid 2 g
Poassium Bromide 1g
Phenidone 0.13 g
Water to 1 litre

To use: FS, 1+1, 1+3

Ilford state this formula is similar to Microphen.


ID-68R Replenisher


Sodium Sulphite (anh) 85 g
Hydroquinone 8 g
Borax 10 g
Phenidone 0.22 g
Water to 1 litre

Only FS ID-68 can be Replenished.

There were a number of Ilford PQ variations of ID-11, some have been erroneously assumed in US publications to be Microphen, although there will be some close similarities. However after commercial trials of the PQ version of ID-11 in the late 1950's Ilford decided to retain ID-11 as an MQ developer, and instead introduced two new PQ Fine Grain Developers, Autophen for Photofinishing laboratories based on this research, and Microphen, which was a re-formulation of the PQ Fine Grain deveveloper, with reduced Sulphite, and a different balance of Phenidone and Hydroquinone to improve the developer's characteristics and performance. When Ilford released Microphen they made clear in various publications that it was a new type of developer.
Reply With Quote
  #2  
Old 25th October 2015, 08:47 AM
pentaxpete's Avatar
pentaxpete pentaxpete is offline
Friend
 
Join Date: Feb 2009
Location: Brentwood, Essex UK
Posts: 390
Default

Very interesting Mr Lostlabours: My Microphen Formula is :
Sodium Tripolyphosphate 3.4 gms
Sodium Sulphite anhydrous 100.0 gms
Sodium Metabisulphite 0.65 gm
Hydroquinone 5.0 gms
Phenidone 0,2 gm
Boric Acid 2,7 gms
Borax 6.8 gms
Potassium Bromide 1.0 gm
Water to 1 litre
NOTE : I have both 'powder' Boric Acid and 'Crystalline' and Formula does not state WHICH one so I used the 'powder' one.
__________________
Computerised and Slightly DIGITISED but FILM still RULES with ME !
Reply With Quote
  #3  
Old 25th October 2015, 09:34 AM
Lostlabours Lostlabours is offline
Friend
 
Join Date: Apr 2012
Location: West Midlands/Aegean
Posts: 1,988
Default Autophen

Quote:
Originally Posted by pentaxpete View Post
Very interesting Mr Lostlabours: My Microphen Formula is :
Sodium Tripolyphosphate 3.4 gms
Sodium Sulphite anhydrous 100.0 gms
Sodium Metabisulphite 0.65 gm
Hydroquinone 5.0 gms
Phenidone 0,2 gm
Boric Acid 2,7 gms
Borax 6.8 gms
Potassium Bromide 1.0 gm
Water to 1 litre
NOTE : I have both 'powder' Boric Acid and 'Crystalline' and Formula does not state WHICH one so I used the 'powder' one.
That's the formula for the powder version of Autophen with the slight adjustment in the buffering (compared to the liquid version) to compensate for the metabisulphite used in Part A

Essentially it's a PQ version of ID-11/D76 and not Microphen.

Ian
Reply With Quote
  #4  
Old 25th October 2015, 11:53 AM
Keith Tapscott.'s Avatar
Keith Tapscott. Keith Tapscott. is offline
Friend
 
Join Date: Jun 2009
Posts: 1,144
Default

Quote:
Originally Posted by pentaxpete View Post
Very interesting Mr Lostlabours: My Microphen Formula is :
Sodium Tripolyphosphate 3.4 gms
Sodium Sulphite anhydrous 100.0 gms
Sodium Metabisulphite 0.65 gm
Hydroquinone 5.0 gms
Phenidone 0,2 gm
Boric Acid 2,7 gms
Borax 6.8 gms
Potassium Bromide 1.0 gm
Water to 1 litre
NOTE : I have both 'powder' Boric Acid and 'Crystalline' and Formula does not state WHICH one so I used the 'powder' one.
The crystalline form of boric acid is usually recommended, as it is easier dissolve than the powder.

Let us know how you get on with that particular formula Pete.
Reply With Quote
  #5  
Old 25th October 2015, 01:05 PM
Lostlabours Lostlabours is offline
Friend
 
Join Date: Apr 2012
Location: West Midlands/Aegean
Posts: 1,988
Default

Quote:
Originally Posted by Keith Tapscott. View Post
The crystalline form of boric acid is usually recommended, as it is easier dissolve than the powder.

Let us know how you get on with that particular formula Pete.
Autophen should give excellent results with slightly less distinct grain than Microphen/ID-68, after vall Ilford spent around 4 years working on it and in particular its replenishers before releasing it commercially.

While it was designed for photo-finishing and a high throughput at a standard development time it's basically only a PQ version of ID-11 so there no reason why it can't be used on a small scale in a developing tank full strength or dilute.

Ian
Reply With Quote
Reply
Support our Sponsors, they keep FADU free:   AG Photographic   The Imaging Warehouse   Process Supplies   RH Designs   Second-hand Darkroom Supplies  

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Making up 'Microphen' formula pentaxpete Chemical formulae 10 24th October 2015 11:03 AM
Ilford ID-11 & Microphen, Batch-Numbers Recall. Keith Tapscott. Manufactured brews 11 6th September 2010 05:05 PM
HP5/Microphen? Richard L Monochrome Film 7 15th July 2010 08:44 AM
Ilford Microphen - The Old Days Mike O'Pray Photography in general 15 10th April 2010 06:11 PM
Microphen Formula pentaxpete Chemical formulae 5 15th March 2009 08:50 PM


All times are GMT. The time now is 08:25 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.