Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> FADU F-stop Enlarger Timer App for Android |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Article Tools | Search this Article | Display Modes |
|
||
FADU F-STOP ENLARGER TIMER The project files for the FADU F-stop Enlarger Timer have now been moved to GitHub as that is a more appropriate place to maintain the project - but read on for an overview and release... |
||
|
#40
By
Bob
on
9th August 2020, 11:07 AM
|
|
Quote:
This is why using an internet connected socket becomes useless - a two second delay is fine as long as it is always two seconds, but of course, it will vary from a half a second to several seconds which is hopeless. Even connecting to your local WiFi router will introduce varying delays, albeit smaller ones. That is why I designed the app to connect the Android device directly to the power switch rather than go through the home router. It's an extra hassle to connect to it, but it removes all those varying delays (it also means the power switch is not connected to the Internet, which is a good thing given the amount of IOT hacking going on!) My Basic R3 will be delivered tomorrow and I can have a play |
|
#42
By
mesires
on
17th August 2020, 01:20 PM
|
|
Quote:
thank you for your feedback and detailed answer! Re 1) You are right. I use the test strips mode in AUTO mode and it is really good. No problem with that. One additional question: Is there a way how to turn off the green led inside the Sonoff Basic??? I think I have read all the posts in this thread but have missed any such information. Daniel |
|
Last edited by mesires; 17th August 2020 at 01:26 PM..
|
#43
By
Bob
on
18th August 2020, 01:48 PM
|
|
Quote:
Cheers, Bob. |
|
#44
By
mesires
on
18th August 2020, 05:54 PM
|
|
Quote:
thank you for the answer. I hoped it would be possible to turn off within the FADU code. But I guess if it was possible, you would have already done it ... I will go the MacGyver way then Daniel |
|
#45
By
Britman
on
18th August 2020, 06:25 PM
|
|
Quote:
Did you have a tinker with the basic R3? Sent from my SM-T810 using Tapatalk |
|
#46
By
Bob
on
22nd August 2020, 06:49 AM
|
|
Quote:
That being the case I have decided to drop that idea and investigate reprogramming it with the timer firmware via OTA in a similar way people do with Tasmota (which has the advantage that other people have already done that!). I have a few other things on the go atm so it may be a week or so before I can have a serious look. Cheers, Bob. |
|
#48
By
Bob
on
25th January 2021, 04:42 PM
|
|
Quote:
I expect it will still work OK - as long as they have not changed the i/o ports etc. - and even if they have, the sonoff code is on github and is trivial to change. Good luck! |
|
#49
By
tillari
on
25th January 2021, 10:02 PM
|
|
Quote:
Another question. I have a router that I’m not using. I can configure a special wifi network with only the router, the phone and the sonoff, without internet connection. If I configure the sonoff r3 in that network (without flashing the firmware), does the timer app work? Or it needs your firmware on the device to talk with the app? I’m sorry for the questions, buy I’m trying to avoid the solder part of the process. Thanks again. Ariel |
|
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Article Tools | Search this Article |
Display Modes | |
|
|
Similar Threads | ||||
Article | Article Starter | Category | Comments | Last Post |
Wanted: Enlarger Timer | ianbarber | Sale or Wanted | 5 | 22nd August 2018 03:20 PM |
Hauck MSA 100 or Mk II enlarger timer | fotofundi | Darkroom | 0 | 26th February 2017 01:02 PM |
Enlarger timer | RussKelly | Darkroom | 0 | 14th September 2014 11:10 AM |
FS: Baeuerle enlarger timer | paulc | Sale or Wanted | 2 | 7th May 2012 06:56 PM |
Enlarger timer issues | PaulG | Darkroom | 20 | 27th November 2009 11:29 AM |