Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
> Agfa C66 Enlarger |
*** Click here for the FADU 2015/2014 Yearbooks *** |
|
Thread Tools | Search this Thread | Display Modes |
#1
|
|||
|
|||
Agfa C66 Enlarger
Hi All,
I have recently got my hands on an Agfa C66 enlarger and wondered if anyone here had ant experience with it? It was working fine when I picked it up, the guy I got it off powered it up and showed me round it. after getting it home and plugging it in for the first time the lamp isn't coming on. there is definitely power going to the unit, the indicator light is on and i can feel/hear the transformer humming. I know this was really intended for home darkroom use so wondered if there was a step I'm missing? I've ordered a new bulb in case that's the issue.. I'm sure this is user error, as I said I saw it working not 3 hours previously... thanks, Jamie |
#2
|
||||
|
||||
Hi Jamie. Moving enlargers quite often causes something to come loose. Check any connectors and try reseating the lamp if you have not tried that already - the lamp socket connections often become corroded over time and cause intermittent faults. It's always worth having a couple of spare lamps knocking around.
Cheers, Bob. |
#3
|
|||
|
|||
I have only ever seen one of these and was impressed how well it was built. The problem you may have could be due to the bulb expiring after it was switched on. I have had it happen with my LPL a couple of times. I have been working away, went downstairs for a cuppa and then when I went back upstairs the bulb had gone.
The back of the bulb will have two pins and these are often neglected but can corrode as can the two holes in the bulb holder the pin goes into, The former can be cured with a new bulb but if the latter it is often easier to replace the holder. You could try coating the pins with a mild metal polish like Solvol Autosol and working the bulina nad out a fe times this usually cleans the pins and socket failing that you should still be able to find that a holder from a Kaiser should fit (still available as spares) or with a bit of searching an LPL from the likes of Second Hand Darkroom Failing that get back to me I have an LPL head that I am cannibalising for spares, I think I still have the bulb holder. If you are using it for B&W printing, the filters in the head are as I recollect set for Kodak units and not Durst. |
#4
|
|||
|
|||
The Agfa C66 was a Durst modified for Agfa to incorporate the timer and analyser for colour printing.
John may be right that the head may not use Drurst calibration, it's more likely it uses Agfa filtration calibration which differs from Kodaks. My Durst M605 manual states: Agfa 50 = Durst 25 kodak 50 = Durst 30 Ian |
#5
|
|||
|
|||
thanks guys, I have got a new bulb coming tomorrow so hopefully that will sort the issue....
Fingers-Crossed! |
#6
|
|||
|
|||
Filter Values
I have just checked a new leaflet from a box of Ilford MG5 and no Agfa enlarger mentioned, so I would go along with Durst values for MG Filtration.
You can always vary them yourself if something isn't hard or soft enough. If it does turn out that it is the bulb holder is corroded, RK Photography have spares to fit the bulb @but obviously not from Agfa'. I think they are Meopta, but the fitting is the same for your bulb. It has two 'pigtail' wires connected and they will need soldering in. Last edited by John King; 21st October 2021 at 12:54 PM. |
#7
|
|||
|
|||
See what maximum numbers the filters adjust to. If it's the Agfa colour head numbers then they were quite different.
Later Agfa MCC papers etc didn't include the Agfacolor head settings, Agfa's own filters were marked in half grades like Ilford's. Most non professional Durst enlargers havemaximum filter settings of 130, professional enlargers sometimes go to 170. Ther Agfa C66 is a version of the M605 which gowes to 130. Ian |
#8
|
|||
|
|||
The image above is from a 2009 Agfa Gevaert publication.
However Agfa like Durst use two scales, this is from an old Kentmere datasheet which states the Meopta scale shoould be used. Durst: Dunco, Durst, Kaiser, Leitz. Kodak: Beseler, De Vere, Chromega, Fujimoto, Jobo, LPL, Omega, Paterson, Vivitar. Agfa: Agfa, Meopta. Note this is for the original Kentmere VC papers not the Ilford versions of Kentmere paper. Ilford changed the sensistivities of the emulsions. Ian Last edited by Lostlabours; 21st October 2021 at 03:21 PM. |
#9
|
|||
|
|||
http://www.film-and-darkroom-user.or...1&d=1634840828
The above is from an information sheet for Ilford Multigrade 111, no longer available. What it tells you is the groupings of the various enlargers. Do not use the values given for the filtration. Just a confirmation then. Agfa, Meopta and Krokus are in the same group. Without trying to take this off topic, Lostlabours mentions The Durst M605 filtration goes up to 130. There is also a B Filter on my M605 that can be switched in, this adds an extra +40Y and also +40M at the same time. This takes the Yellow and Magenta ranges up to 170. Cheers.
__________________
It will all be over by Christmas. |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Agfa enlarger | Anon01 | Darkroom | 21 | 21st October 2019 05:36 PM |
I used to have an Agfa C66 enlarger | Anon01 | Darkroom | 22 | 6th October 2019 02:27 PM |
Agfa and Kodak enlarger filter values | IainHC | Darkroom | 16 | 9th February 2016 02:02 PM |
Agfa APX 100 | alexmuir | Monochrome Film | 6 | 28th November 2012 12:24 PM |
Agfa 108 | Disderi | Chemical formulae | 7 | 5th March 2012 08:56 PM |