![]() |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
![]() |
> Photographers Formulary PMK, Pyrocat HD, TF4 & TF5 fixer available in UK |
*** Click here for the FADU 2015/2014 Yearbooks *** |
![]() |
|
Thread Tools | Search this Thread | Display Modes |
#11
|
|||
|
|||
![]()
I saw it demonstrated in a book about night photography by Andrew Sanderson. It seemed to be useful for achieving a greater range of highlight tones. There are examples in that book, although it’s a while since I looked at it. The obvious conclusion from the sample images, however, was that the Pyro developer could bring out more detail in scenes featuring streetlights and similar types of illumination. I don’t think the author had any reason to promote this developer over others, so I assume his results gave a fair view of the comparison. I will try to get started with it soon and report back.
Alex Sent from my iPhone using Tapatalk Pro |
#12
|
||||
|
||||
![]()
I read Andrew's book (from a library) but it was a long time ago and I didn't know my Adox from my Efke back then. Pyro would have gone right over my head. It would be great if you could do a comparison of pyro against Perceptol or Barry Thornton two-bath but I know from personal experience what a pain that sort of thing is.
|
#13
|
|||
|
|||
![]()
I will try to do that. I think there are people on FADU who have experience of using Pyro developers. I’m sure there was a recent thread about it. That was also part of the reason I got it.
Alex Sent from my iPhone using Tapatalk Pro |
#14
|
||||
|
||||
![]()
I use PMK exclusively now.
My preferred film for many years was PanF, which I liked in Aculux. When Aculux became unavailable I tried Ilfosol and Rodinal. Ilfosol was Ok but didn't keep well, Rodinal I just didn't like teh grain structure. PMK suited PanF really well (even though it doesn't stain much) and I eventually worked through EI's and dev times for HP5, Fomapan 100 and SFX 200 which I also used. Fomapan I've discontinued, and now I use HP5 in 35mm, 120, and 5x4- it stains well and prints beautifully on Ilford MG papers. I stick with PMK because I know it, and how it works with the films I like. It keeps well, cost is OK, and frankly I couldn't be arsed changing developer again and going through testing all over again. I have read variously that the stain doesn't matter, that it only matters on graded papers, that it's counterproductive on VC papers . . . I use both VC and Graded paper. My stained negs work perfectly well on both. Perhaps some more discerning printers can see a difference, I don't. Choice of developer is part of a system. Film, dev and papers all combine in slightly different ways, so if you find something which works for you I'd say stick with it. I would love to have time to really work on my technique and be a better printer, but for now I'm sufficiently happy with PMK I don't want to look further. Brock- if anyone ever fancied a really big project, I suspect that some film/ dev combinations suit some papers better than others. PanF + PMK + Ilford MG WT paper works so well, and prints so easily, it feels like I'm cheating. Anyone fancy trying a giant comparative test?? |
#15
|
||||
|
||||
![]()
I’ve often thought about a film dev swop. We could easily send a roll of exposed film to be processed by a fellow fadu member in their developer of choice. Although in some combo’s, it might not necessarily work out to be any/much cheaper than doing it yourself.
__________________
MartyNL “Reaching a creative state of mind thru positive action is considered preferable to waiting for inspiration.” - Minor White, 1950 |
#16
|
||||
|
||||
![]()
Marty, that's an interesting and fairly off the wall idea.
Effective film speed can vary with developing time, so I'm imagining using 120 film or short (24 exp) 135, with bracketed exposures over and under. That way, the dev time given wold suit some frames, and give an EI for the film. With 120 you could contact the film on different papers and have images just big enough to compare. Only question is, how would we share those results? Something like a portfolio we could circulate? There are postal print portfolios which circulate between members, so not without precedent. |
#17
|
|||
|
|||
![]()
I’m pleased to hear PMK works with VC papers, Colin. Can I ask which fixer you use? The instructions suggest an alkaline fixer is best, but I wondered if normal, non-hardening fixers would be ok. Thanks,
Alex Sent from my iPhone using Tapatalk Pro |
#18
|
||||
|
||||
![]()
Good evening Alex.
I've been using Ilford Hypam for quite a while now. You'll find some films stain more than others. SFX negligible, PanF very light, Rollei IR 400 obvious, Fomapan 100 and HP5 very obvious. Haven't tried Acros or any Kodak materials. I've just browsed the gallery; you seem to use quire an eclectic mix of films, and I'm curious how about how the delta films turn out. Have fun experimenting. |
#19
|
|||
|
|||
![]() Quote:
Thanks, Colin! I have used a range of films, but seem to be moving towards HP5 and Delta 100. The Kodak materials have sadly become very expensive. I will definitely try Delta 100 in PMK at some point and report back. Alex Sent from my iPhone using Tapatalk Pro |
#20
|
|||
|
|||
![]() Quote:
If there are enough takers then I can make an order. This is for dry chemicals only. Please note that I do not get a discount on some of the products (eg products containing gold chloride) and some require DEA clearance, so these will be a no-no! The price will be approximately the same in £ as PF's cost in $ on their website. Any order will need the following: Name of Product, PF's SKU number, kit size and quantity. I need at least 10 items to be able to make an order and I will ask for prepayment prior to confirming the order with PF. I would like to think that you would have your chemicals within 2 weeks of my confirming the order with PF. David
__________________
www.stillphotographic.com |
![]() |
Support our Sponsors, they keep FADU free: AG Photographic The Imaging Warehouse Process Supplies RH Designs Second-hand Darkroom Supplies |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pyrocat-HD or Pyrocat-M? | Keith Tapscott. | Manufactured brews | 4 | 13th October 2016 11:38 AM |
Any proof that pyrocat is better? | Brock | Manufactured brews | 11 | 10th October 2016 09:33 PM |
Photographers' Formulary Special Opening Offer | Nova Darkroom | New products and offers | 0 | 7th November 2012 12:02 PM |
The PCS Darkroom Formulary | TonyMiller | Chemical formulae | 23 | 1st September 2012 07:06 PM |
Kodak Formulary – 1944 | Roy_H | Chemical formulae | 0 | 1st December 2008 04:25 PM |